Home - Knowledge - Details

The protective effect of multi-purpose furnace production line on vacuum heat treatment of materials

For many materials, heating in a non-vacuum furnace not only generates oxides, hydrides, and nitrides, but also absorbs gases that diffuse into the material, severely degrading its properties. These problems, such as oxidation, reduction, decarburization, carburization, gas absorption, and even corrosion, are sometimes unavoidable even in controlled atmosphere furnaces or salt baths. However, vacuum heat treatment furnaces can often avoid these problems.

Vacuum heat treatment essentially involves heat treatment in an extremely rarefied vacuum atmosphere. Gas analysis within vacuum furnaces reveals that the residual gases are H₂O₂, O₂, CO₂, and organic vapors such as oil and fat. Because the concentrations of these gases in vacuum furnaces are extremely low and their partial pressures are too low to trigger oxidation, reduction, decarburization, and carburization reactions in the material being treated, the chemical composition and original surface brightness of the material remain unchanged. The high vacuum in a vacuum furnace has two key characteristics:

1. The chemical activity of a high vacuum atmosphere is extremely low. Therefore, when heat treating in a vacuum furnace, reactions occurring at the gas-solid interface, such as oxidation, reduction, decarburization, and recarburization, are prevented from occurring to a significant degree.

2. The high vacuum atmosphere in a multi-purpose furnace causes the gas volume to increase very rapidly, which can cause the material to release dissolved gases or decompose oxides. These two characteristics of the high vacuum atmosphere in a vacuum furnace result in a very low oxygen partial pressure, suppressing oxidation. Therefore, to achieve oxidation-free conditions, the oxygen partial pressure in the vacuum furnace must be below the decomposition pressure of the oxides.

info-908-902

Send Inquiry

You Might Also Like