The relative humidity of vacuum packaging machine is not more than 85%

The relative humidity of vacuum packaging machine is not more than 85%

In addition, the working environment, cleanliness, and safety inspection of the vacuum sealing machine need special attention. For example, the vacuum packaging machine should be used in the conditions where the temperature is -10°C-50°C, the relative humidity is not more than 85%, and there is no corrosive gas in the surrounding air, no dust, and no explosive risk. Like the packer and shortener, this vacuum packer is powered by three-phase 380V. The impurity filter should be disassembled and washed frequently (generally, it should be cleaned once every 1-2 months, and the cleaning time should be shortened if the debris-like objects are packaged). For continuous duty for 2-3 months, the back cover 30 should be opened to add lubricating oil to the sliding parts and switch bumps, and the joints on the heating rod should be lubricated according to the application conditions. The vacuum packaging machine must have a reliable grounding device during installation. The heating strip and the silicone strip should be kept clean, and no foreign matter should be stuck, so as not to affect the sealing quality.

How to maintain the vacuum packaging machine after autumn

Carry out regular maintenance on the vacuum pump, add oil (pay attention to maintaining the oil level), and be careful not to allow reverse, so as to avoid the wrong control of the pump and the reverse of the pump, and the oil is sprayed into the vacuum system in the pump. Always check whether there is foreign matter on the sealing varnish (polytetrafluoroethylene) of the heat-pressing frame and whether it can be flat to ensure the sealing strength. Always check whether the mechanical grounding can be contacted to ensure safe power consumption. When a defect of the vacuum packaging machine is found, the power supply should be blocked in real time. When necessary, the emergency stop button should be connected. After deflation, the machine cover should be lifted, and then the voltage loss should be closed, and the fault should be checked and eliminated.

www.superbheater.com