There are several methods for heating and insulation of the barrel body:
Leave a message
There are several methods for heating and insulation of the barrel body:
1. Bottom heating method: Place the barrel on a cast aluminum electric heating plate for heating.
2. Internal heating method: Use an electric heating rod to pierce into the barrel for heating.
3. External heating method: Use a silicone rubber electric heating plate or glass fiber electric heating plate to surround the barrel body for heating. According to different situations, several methods can be used alone or together.
Type: KN-
Power: 500-3000 (W)
Appearance scale: can be determined according to needs.
Main purpose: heating the barrel body
The oil drum electric heater is heated to easily remove the liquids and condensates inside the drum, such as adhesives, grease, asphalt, paint, wax, oil, and various resin materials. After heating the drum body, the viscosity is uniformly reduced, reducing the power of the pump. Therefore, this equipment can be used year-round regardless of the season. The outer surface of the oil drum heater is equipped with sensors, which can directly control the temperature through temperature adjustment.
Figure 1: Bottom electric heater for bucket
Technical parameters:
Voltage: 220V/380V (single-phase/three-phase) AC 50HZ
Power: 4.5-8Kw
Temperature control scale: 20-300 ℃
Weight: 35kg
Electrical strength: 1500V/1min
Insulation resistance:>1.5m Ω
The silicone rubber electric heating plate used for external heating in Figure 2 is equipped with sensors on the outer surface of the heater, and the temperature is directly controlled through temperature adjustment.
Standard for silicone rubber electric heating plates:
20 liters cylindrical heater 20 liters cylindrical heater
Size 250 × 1740mm 200 × 860mm 125 × 1740mm
Voltage power 220V 2000W 220V 800W 220V 1000W
Temperature regulation 30-150 ℃ EGO
There are several methods for heating and insulation of the barrel body, with a weight of about 0.5kg, about 0.4kg, about 0.3kg:
1. Bottom heating method: Place the barrel on a cast aluminum electric heating plate for heating.
2. Internal heating method: Use an electric heating rod to pierce into the barrel for heating.
3. External heating method: Use a silicone rubber electric heating plate or glass fiber electric heating plate to surround the barrel body for heating. According to different situations, several methods can be used alone or together.
Type: KN-
Power: 500-3000 (W)
Appearance scale: can be determined according to needs.
Main purpose: heating the barrel body
The oil drum electric heater is heated to easily remove the liquids and condensates inside the drum, such as adhesives, grease, asphalt, paint, wax, oil, and various resin materials. After heating the drum body, the viscosity is uniformly reduced, reducing the power of the pump. Therefore, this equipment can be used year-round regardless of the season. The outer surface of the oil drum heater is equipped with sensors, which can directly control the temperature through temperature adjustment.
www.superbheater.com
