Three precautions for regular maintenance of automatic metering powder quantitative packaging machine

(1) Lubrication: oil lubrication shall be regularly added to the gear engagement, oil injection hole of the bearing with seat and all moving parts. Once per shift, the gear reducer shall not operate without oil. When adding lubricating oil, pay attention not to put the oil tank on the rotating belt to prevent it from slipping and losing rotation or damage due to premature aging of the belt.
(2) Maintenance: Before using the automatic metering powder quantitative packaging machine, check the screws at all parts to ensure they are not loose. Otherwise, the normal remote rotation of the machine will be affected. For the electrical parts, pay attention to waterproof, moisture-proof, anti-corrosion, and rat-proof to ensure that the electric control box and terminal are clean, so as to prevent electrical failure. After shutdown, keep the two heat seals in an open position to prevent scalding the packaging materials.
(3) Cleaning: After the machine is shut down, the measuring part should be cleaned in time, and the heat seal body should be cleaned frequently to ensure that the sealing lines of the finished packaging products are clear. The scattered materials should be cleaned in time to facilitate the cleaning of the machine parts, so as to better extend its service life. At the same time, the dust in the electric control box should be cleaned frequently to prevent short circuit or poor contact and other electrical faults.
Due to its small size and easy to float, powder products are equipped with automatic metering powder quantitative packaging machine, which not only facilitates the packaging of this product, but also cleans people's working environment and ensures people's safety and health at work. If this packaging machine can operate for a long time, it is necessary to pay attention to its daily maintenance, so that it can better serve our production and life.