Troubleshooting of coating machine

With the development of technology, polymer composites can now be used to deal with the above problems, and the more sophisticated Meijiahua technology system can be used. The material has good adhesion and compressive strength, which can avoid the abrasion of the coating machine when it is disassembled on site. Due to its concession of metal shortage, it can well absorb the impact oscillation of the device and avoid secondary wear.
Common faults and solutions of coating machine:
During the operation of the coater, the transmission parts are often worn, such as the drying cylinder shaft head of the coater and the roll bearing chamber. The traditional correction methods include surfacing, thermal spraying, brush plating, etc., but there are certain disadvantages: surfacing will make the surface of the parts reach a high temperature, forming deformation or cracks, and even lead to shaft cracking in severe cases; The electroplating coating should not be too thick, and the pollution is severe, and the application is also constrained.
The concrete foundation of the coating machine is damaged. The coating machine is affected by corrosion, aging, device vibration and other factors, and it will also cause damage to the concrete base and other parts, resulting in the loosening of the bolts of the fastening device, which seriously affects the production. The traditional concrete pouring method will greatly extend the correction time, which is difficult for enterprises to bear. Polymer composite materials also deal with this problem very well. The impact resistance and compressive strength of the materials themselves are far greater than the current concrete materials. Together, they also adhere to steel and other rough surfaces, and can cure quickly. It is a new scientific research achievement to correct the damage of the concrete base of the coating machine.