Use of smelting tools in pusher furnace

The surface impurities should be removed, and the place in contact with the metal should be preheated and then painted. The tool must not be stained with water, otherwise it will cause the molten liquid to splash or even explode.

Before smelting the alloy material, it should be cleaned and preheated to remove the moisture adsorbed on the surface. In order to control the alloy composition, it is recommended to use 23 new materials and 13 reheating materials together. The melting temperature cannot exceed 450°C. Clean up the scum on the liquid surface in the zinc pot, replenish the zinc material in time, and maintain the normal height of the melt level, because too much scum and too low liquid level will easily cause the slag to enter the gooseneck barrel and strain the steel. Resin, the hammer and the barrel itself cause the stuck hammer, gooseneck and hammer to be scrapped.