Vacuum heat treatment equipment shall not make the charge hit the furnace cover

Vacuum heat treatment equipment shall not make the charge hit the furnace cover

①When charging, the height of the stock pile from the bottom of the furnace should be appropriate, not too high, to prevent the charging material from damaging the bottom of the furnace.

②After the high temperature frit furnace is charged, if the charge is too high and it is estimated that the furnace body cannot be driven in, the charge must be leveled, and the charge must not hit the furnace cover. When dropping the furnace cover, do not use too much force to avoid damaging the furnace cover.

③When the malleable iron molten iron is poured into the electric arc furnace from the cupola with the ladle (the double method is used to extract the ancestors, and the composition is adjusted), the operator should stay away from the furnace body to prevent the molten iron from splashing and hurting people.

④When the molten iron enters the high-temperature frit furnace, the inclination of the electric arc furnace should rotate with the height of the ladle, and the molten iron is not allowed to flow out from the feeding port.

The double-layer furnace shell of the vacuum heat treatment equipment is equipped with an air cooling system

The frit furnace is a high-efficiency, energy-saving, environmentally friendly and new type of electric furnace independently developed and produced by Huarong with the introduction of foreign technology. It has a reasonable structure and a beautiful appearance. Beautiful two-color imported epoxy powder electrostatic spraying process, processed, high temperature resistance, corrosion resistance, using high-quality heating elements, double-layer furnace shell is equipped with an air cooling system, which can quickly cool down; the furnace has a balanced temperature field and a furnace body. It has the advantages of low surface temperature, fast temperature rise and fall rate, and energy saving.

www.superbheater.com