What are the advantages of infrared ray heating tube

The difference between infrared ray heating tube and far infrared heating pipe infrared ray heating tube is not very big, but people's customary names are different. Infrared ray heating tube refers to all heaters that use radiation as heating methods, including short wave and medium wave. Let's take a look at the advantages of infrared ray heating tube today.

1. The wavelength is controlled at about 0.76 ~ 25mb infrared radiation. Users can select heating tubes of different wavelengths according to the material and physical characteristics of the heated workpiece, or select heating tubes of different wavelengths to form the best combination scheme.

2. The thermal efficiency of the heating tube is very high, and the infrared radiation efficiency can reach more than 86% at a certain wavelength and direction.

3. The thermal inertia of infrared radiation heating tube is extremely small. After being powered on, it can reach about 50% of the rated power in 1 to 2 seconds. After about 2 to 4 seconds, it can run at full power. The temperature rises and the temperature drops quickly and accurately.

4. The volume of the heating tube itself is very small, but the power is very large. The rated power of a single heating tube can reach more than 6000W, and it can be easily made into plate-shaped heaters, hot air heaters, ovens, ovens and other high infrared heating equipment.

5. According to the needs of customers, directional reflective layers containing precious metals or inorganic substances such as gold, titanium can be sprayed on a certain part of the outer wall of the heating pipe, which can greatly improve the heating efficiency and reduce the temperature of reflecting plate or the insulation board.

6. The heating pipe has low cost and long service life. The continuous service life of the heating pipe below 3000W exceeds 5000 hours under rated conditions, and the service life of the heating pipe above 3000W exceeds 3000 hours, thus greatly reducing the operation cost.

7. Various infrared radiation heating tube composed of heating equipment can realize automatic temperature control through temperature controller, thyristor AC power adaptor or pressure regulator, etc. Because of its small thermal inertia, the temperature control is fast and accurate.

8. Due to high energy and high density radiation, the time required for heating work and the length of drying channels are greatly shortened, saving the space occupied by equipment and directly reducing the investment of users in equipment and factory buildings. At the same time, due to high thermal efficiency, it can greatly save electric energy and reduce production costs.