What are the precautions for using a TMR feed mixer?

The TMR feed mixer can mix various chopped forage, crop straw, silage, and other fibrous feeds with concentrated feed in one operation, saving feed costs, labor time, reducing labor intensity, and improving feeding efficiency. It is a great helper for livestock farmers!

Precautions for using the TMR feed mixer:

1. Familiarize yourself with the rules and prepare accordingly.

(1) Before using the TMR feed mixer, carefully read and familiarize yourself with the instruction manual, master the functions of all control buttons, and operate the control buttons proficiently. Check all indicator labels on the TMR feed mixer and familiarize yourself with its schematic diagram requirements;

(2) Before operating the TMR feed mixer, check that all protective devices are functioning properly and prepare other supporting equipment such as tractors, feed loaders, feeding and unloading belt conveyors, and silage feed takers.

2. Safety first, ensure safety. (1) Before use, first check if the fuel supply is sufficient for operation. Before starting the TMR feed mixer, preheat it at low speed for 5 minutes. During the preheating process, operators should carefully check the TMR feed mixer's operation using their eyes, ears, hands, and nose. Work can only begin when the TMR feed mixer is operating normally.

(2) It is forbidden to carry people or goods on the TMR feed mixer during operation. If it is necessary to observe the equipment's operation, the ladder on the side of the container must be used. No one is allowed to walk around the TMR feed mixer or the feed pile/silage pile. It is strictly forbidden to arbitrarily modify, adjust, damage, or remove the protective devices and warning labels on the TMR feed mixer. Maintenance work is strictly prohibited while the TMR feed mixer is running.

(3) Operators must not operate the TMR feed mixer if they are feeling unwell, intoxicated, excessively fatigued, or have taken medication before starting work. If operators discover any safety hazards during operation, they should stop the machine immediately and resolve the mechanical problems.

3. Regular maintenance and timely repairs are required. TMR feed mixing equipment operates for extended periods daily, resulting in varying degrees of wear on its components. Operators should perform regular maintenance and promptly replace worn parts to ensure the equipment's proper functioning. To facilitate maintenance, it is essential to have readily available spare parts, such as blades, chains, and conveyor belts, readily available.