What factors will affect the bending accuracy of a fully automatic pipe bending machine

What factors will affect the bending accuracy of a fully automatic pipe bending machine

1. The thickness and roughness of the material

Laser cutting is suitable for cutting thin plates, with effective thicknesses of carbon steel below 12mm and stainless steel below 6mm. The processed quality is significantly enhanced, and efficiency is also guaranteed. If cutting<1mm material, the incision will also be relatively smooth. The surface roughness of materials also determines the quality of cutting. Generally, the smoother the material, the better the quality of the cut.

2. Working power and mode of CNC pipe bending machine

After research, it has been proven that the higher the power, the better the effect even when cutting the same sheet metal. The laser cutting mode and material have a certain degree of compatibility, and the higher the effect, the better.

3. Focus position

The focus of the laser cutting machine can be aligned, and the cutting accuracy and precision can meet the desired requirements.

4. Cutting speed

In fact, no matter what type of material it is, if it can make the cutting speed match the material, then the cutting effect is better at this time. If it is too fast or too slow, it will have an impact on laser cutting.

5. Auxiliary gas pressure and type

The higher the pressure of the auxiliary gas, the higher the purity of the gas, the fewer impurities adhered to the material, and the smoother the cutting edge. Generally speaking, the speed of oxygen cutting is faster, the cutting effect of nitrogen is better, and the cost is also lower. The cutting effect may vary depending on the type of gas used.

www.superbheater.com