What is the deformation of the stainless steel tableware in the disinfection cabinet after disinfection?

1. What is the deformation of stainless steel tableware after disinfection?
As is well known, metal expands and deforms when heated, and stainless steel tableware is no exception. If people buy stainless steel tableware that is thinner, it will deform under longer high-temperature conditions, and even if it cools down, stainless steel tableware cannot be restored. To avoid this situation, thinner stainless steel tableware should not be placed in the high-temperature room of the disinfection cabinet for disinfection. UV disinfection can be chosen.
2. Why does the bowl turn yellow after disinfection in the disinfection cabinet?
Some people found that the bowls and plates turned yellow after being disinfected. This situation may be due to people not washing the bowls thoroughly, causing oil or stains to remain on the bowls; It may also be due to poor material of the bowls and plates. After high-temperature disinfection of the disinfection cabinet, the remaining oil stains will turn yellow and black. People can soak yellowed bowls and plates in vinegar, detergent, and hot water for about five minutes, and then remove these stains with a steel wire ball.
3. What is the reason why the disinfection cabinet is not powered on?
Poor contact of the power socket of the disinfection cabinet, broken or disconnected power cord, malfunction of the over temperature fuse, burnt power board, and burnt relay can all lead to no power supply. If there is a problem with the power cord and socket, people can replace it with a new power cord and tighten the plug. If it is caused by other reasons, you should contact a maintenance technician for on-site maintenance.
4. Why is the disinfection cabinet leaking electricity?
The disinfection cabinet does not have a grounding wire, or there is induction current on the exposed metal surface, or if the disinfection cabinet is kept in a damp place for a long time, its wiring, control board, and button board may leak due to moisture. The solution is to add ground wires to the disinfection cabinet; Place the disinfection cabinet in a dry environment while repairing damp parts.
5. Why does the temperature not rise when the disinfection cabinet is working?
Due to the quartz heating tube, this situation is the simplest to repair, and only needs to be replaced with a quartz heating tube of the same model.

The above content is organized by Superb heater Company, super heater. Mainly professional production: industrial heating elements, temperature measuring elements, production equipment, accessories, and raw materials such as tubular heaters, tubular heaters, belt heaters, ceramic heaters, silicone rubber heaters, thermocouples, etc.

Welcome global industry partners to discuss cooperation!