What should I do if the stainless steel electric heating tube leaks electricity? How can I choose to ensure the quality?

Solution to leakage of stainless steel electric heater tube:

There are many reasons for leakage of equipment, including: no grounding connection; insulation damage of electric heating tube; equipment burnout or short circuit of cup body; improper cleaning, water touches the terminal of the equipment; circuit wire falls off and collides with the cup body; there is too much dirt on the equipment socket or power plug; the water quality is too poor, and a lot of scale is formed on the equipment.

After finding the cause, we need to find the corresponding solution according to the cause. We need to connect the ground wire according to the requirements and check the accuracy; check and repair the equipment. If there is still leakage, the insulation material needs to be replaced; if the electric heating tube is damaged, it needs to be replaced with an electric heating tube of the same specification; when cleaning, ensure the correct method and dry the equipment; check the fallen wire and weld the wire firmly again.

Methods for choosing high-quality stainless steel electric heating tubes:

If you want to ensure the quality when purchasing equipment, you need to study it from various angles. First of all, you need to look at its heat resistance. The parts of the equipment need to withstand the heat resistance test specified by the professional under the standard test voltage and conditions, and there is no damage during the test to prove the heat resistance of the equipment itself; at the same time, the heating time of the equipment must be guaranteed. Under the test voltage, the components must rise from the ambient temperature to the test temperature within a certain period of time.

At the same time, pay attention to the specified power deviation. When the equipment is fully heated, the specified power deviation of the equipment parts cannot exceed the specified range; when selecting equipment, it is also necessary to conduct sealing tests and leakage water pressure current tests on the equipment. The test results cannot exceed the standard, and the thermal leakage current at the working temperature cannot exceed the calculated value in the formula. This should also be paid special attention to when purchasing.