What should I do if the water dispenser leaks? Common faults and troubleshooting methods of drinking fountains

What to do if the water dispenser leaks
1: Water leaks from the top of the water dispenser
Water leakage on the top of the drinking water dispenser is generally caused by a cracked component of the water purification bucket. The other is that there is a problem with the floating ball of the water purification bucket, such as being unable to seal, but this situation generally does not occur. Another possibility is that the water purification bucket is not properly placed and there is air pressure, resulting in water leakage to the outside.
Maintenance method: Check whether the bucket is cracked. If it is not, remove it and replace it or try replacing it with another bucket of water.
2: The smart seat of the water dispenser leaks water
There are two main reasons for water leakage in the smart seat of the water dispenser. One is that there is a crack at the bottom of the smart seat, and the other may be that the bucket leaks air. There are cracks on the bucket that cannot be seen by the naked eye, and there is no water leakage when there is water. However, when the smart seat is working, there will be negative pressure in the bucket causing air intake, and the smart seat will overflow.
Maintenance method: Replace the smart seat or bucket of the water dispenser
3: The tap of the drinking machine leaks
The main reasons for water leakage from the tap of the drinking machine are loose cap at the head end, breakage of the internal silicone sleeve, or internal impurities, scaling, etc.
Maintenance method: Tighten the head cap, clean impurities, and if the problem cannot be solved, only replace the faucet.
4: Water leakage from the internal components of the water dispenser
The silicone tube is broken, the welds of the hot and cold tanks leak, the electronic ice tank leaks, and the electromagnetic valve (pipe machine) leaks
2. No heating or cooling
"The failure encountered by a drinking water dispenser is usually not heating or cooling. If it is not heating, let's first check to see if the power switch on the back of the machine is turned on. If it is turned on but not heating, open the back panel of the machine to check if the wires are loose. If they are loose, reconnect them.".
3. Thermostat replacement
The replacement of the thermostat is very simple. Open the back cover of the water dispenser, loosen the screws, and replace the thermostat. Note that the thermostat must adhere to the wall of the hot water tank, and then reinstall the screws.
4. "If the water tank overflows, it is necessary to replace the floating ball. The floating ball replacement step is to remove the top cover of the straight drink, remove the water tank, and open the cover to replace the floating ball.".
5. For other reasons, if it doesn't cool down or the light doesn't come on, you can notify the dealer or contact the manufacturer to send the parts and replace them all. This rarely happens.

The above content is organized by Superb heater Company, super heater. Mainly professional production: industrial heating elements, temperature measuring elements, production equipment, accessories, and raw materials such as tubular heaters, tubular heaters, belt heaters, ceramic heaters, silicone rubber heaters, thermocouples, etc.

Welcome global industry partners to discuss cooperation!