What should we pay attention to when installing fluoroplastic heat exchangers?

What should we pay attention to when installing fluoroplastic heat exchangers?

The installation of the heat exchanger requires us to ensure that the fluoroplastic heat exchanger does not sink. We can connect the pipeline to the connecting pipe of the heat exchanger, which can be divided into two types. Firstly, the fluoroplastic heat exchanger is placed directly on the saddle foundation without a saddle support, so it can move freely with thermal expansion. The second type of heat exchanger is fixed to the foundation through saddle supports.

Before installing the fluoroplastic heat exchanger, we need to conduct a detailed inspection, such as checking the plane position, the elevation of the foundation, whether the thread condition is good, whether the nuts and washers are complete, and whether the surface of the foundation where the pad iron is placed is flat.

After inspection, place a pad iron on the foundation before installing the fluoroplastic heat exchanger, and the surface of the pad iron placed on the foundation should be leveled to facilitate contact between the two. Placing shims can increase the stability of the heat exchanger on the foundation. Generally, the selection can be calculated based on conditions such as electroplating processing volume or existing DC power equipment. Choosing the appropriate electroplating tank size is of great significance for formulating growth plans, estimating production, and ensuring electroplating quality. The bottom of the steel groove should be 100mm to 120mm above the ground to prevent severe corrosion. It consists of an electric motor, a reducer, an eccentric disc, a connecting rod, and a pole support roller. The cathode moving electroplating tank consists of a steel tank lined with soft polyvinyl chloride plastic, a conductive device, a steam heating tube, and a cathode moving device. Choosing the appropriate electroplating tank size is of great significance for formulating growth plans, estimating production, and ensuring electroplating quality.

www.superbheater.com