What to pay attention to when using commercial induction cookers

When the power fuse and power transistor of a commercial induction cooker are burned out, it is necessary to replace the power fuse and power transistor, and check if there is a short circuit in the subsequent circuit. If the indicator lights and buttons of the commercial induction cooker can operate normally but there is no sound alarm prompt, it may be that the resistance of the induction cooker has malfunctioned. In this case, the resistance needs to be replaced.
What to pay attention to when using commercial induction cookers:
1. Before using a commercial induction cooker, the user manual of the product should be carefully read. When using a commercial induction cooker, dry burning in an empty pot is not allowed because the heating speed of the commercial induction cooker is very fast, and dry burning in an empty pot can easily damage the cooker. At the same time, it is necessary to regularly clean the bottom of the commercial induction cooker to avoid inhaling impurities.
2. During the use of commercial induction cookers, do not vigorously rotate the handle of the induction cooker to avoid damage to the switch. After use, do not directly cut off the power switch, and wait for the induction cooker to stop running before cutting off the power switch, otherwise it is easy to lock the power switch.
3. The microcrystalline glass of commercial induction cookers belongs to fragile items, so during use, it should not be vigorously shaken or hit. If the surface of the microcrystalline glass cracks during use, it should be immediately stopped from use.

The above content is organized by Superb heater Company, super heater. Mainly professional production: industrial heating elements, temperature measuring elements, production equipment, accessories, and raw materials such as tubular heaters, tubular heaters, belt heaters, ceramic heaters, silicone rubber heaters, thermocouples, etc.

Welcome global industry partners to discuss cooperation!