What will happen if the stainless steel electric heating pipe is not properly cleaned and maintained?

The maintenance details of the stainless steel electric heating pipe of the energy-saving heating ring have always been the focus of attention of countless users. The energy-saving heating ring should know that the basic maintenance must be adhered to, because even the high-quality equipment, if it does not do a good job in the daily cleaning and maintenance, it is easy to make the performance greatly reduced and the service life shortened.
Maintenance details of energy-saving heating ring stainless steel electric heating pipe:
First, pay more attention to the performance of this type of heating pipe in the process of purchase and use, so as to avoid that the specified heating temperature is exceeded due to too large heat load, which will lead to different degrees of damage to the heater.
Second, in the process of daily use, remember that the input voltage of this type of product cannot exceed 10% of the specified voltage, otherwise it may cause certain safety accidents. In addition, the input voltage can not be lower than the specified standard voltage, which may lead to the phenomenon that the heat does not meet the standard.
Third, during daily use or storage, the product should be cleaned and maintained, and the relevant terminals must be kept clean and dry, otherwise the insulation performance may be reduced due to moisture and other factors.
Fourth, if there are corrosive liquids, gases or flammable and explosive substances in the environment, the wiring part of such electric heating pipes should be protected by insulating sealing devices in accordance with the table, so as to prevent the occurrence of safety accidents.
Fifth, when the heated object contains viscous substances, such as stearic acid, sodium nitrate, paraffin, etc., the power supply voltage of the equipment must be reduced during the initial heating. When the viscous substances are all melted into liquid, the equipment must be adjusted to the rated voltage for heating.
Sixth, for the maintenance of stainless steel heating pipes, special attention should be paid to the heating medium to prevent the medium from corroding the shell material on the surface of the heating pipe.
Seventh, for the storage and placement of such products, it is necessary to keep dry, ventilated and other conditions, and remember not to put them in a dark and humid environment.
Eighth, when such products have been used and operated for a period of time, there will usually be dirt and oil dirt on the surface. It is not only necessary to carry out regular cleaning and maintenance work, but also more important to pay attention to not causing scratches and scratches on the tube shell during the maintenance and cleaning process. You should know that if the dirt and oil dirt are not cleaned regularly, it is easy to affect the thermal efficiency of the stainless steel electric heating pipe.