Quartz Tube Heating Element

quartz tube heating element uses the raw material of imported carbon fiber heating body, which has the advantages of large power margin, high temperature resistance, high heat capacity, long service life, and the power can be adjusted at will. It meets the general safety requirements of many household appliances.

Quartz tube heating element product performance characteristics

Stable electrical performance

After the quartz tube heating element is energized, the power is stable within a certain tolerance range during frequent start-up, shutdown and long-term continuous work, without any instantaneous power shock.

 High thermal efficiency, carbon fiber heating body is pure black body material, in the electrothermal conversion process, little visible light, electrothermal conversion efficiency of more than 95%, than nickel, chromium, tungsten, molybdenum and other materials as the heating body of the heater, can save 30%; in the same power, than the nickel-chromium metal heaters radiation temperature 30 ℃ higher than the tungsten-molybdenum wire quartz heaters 15 ℃ higher. The infrared rays emitted are directly absorbed by human body, clothes, water, etc., and the heat loss in the heat transfer process is small; the absorption of carbohydrates is stronger, with good carbon atomic resonance effect, and the product efficiency is greatly improved.

Quartz tube heating element  body has the characteristics of rapid temperature rise, small thermal lag, uniform heat generation, heat radiation transmission distance, fast heat exchange, etc.

Quartz tube heating element technical characteristics.

1. No far-infrared coating, spectral radiation matching absorption characteristics, long-term use of radiation performance does not degenerate, high efficiency of electrical and thermal conversion. Energy-saving than the general heating element about 30%.

2. High working temperature, wide selection range. Among them with ceramic cap package type, the highest temperature resistance up to 800 ℃.

3. Fast temperature rise, small thermal inertia, high temperature resistance, corrosion resistance, good stability of thermochemical properties, long service life, high insulation strength.

4. No pollution, a clean type heater, in line with the requirements of modern production of high pace and high quality, suitable for high sanitation requirements on household appliances.

5. Design, manufacture and installation are very convenient, economic and safe.

Notes on installation and use.

Horizontal installation tilt is not more than 30 degrees.

Use with aluminum reflector or stainless steel reflector, flat or parabolic reflector. But the best parabolic reflector: improve the high utilization of radiation, the factory can be processed on behalf of.

Should avoid violent vibration and shaking.

The distance between the heating element and the heated object is best controlled as 150 a 450 mm is appropriate, depending on the specific condition of the drying object.

Quartz heating element is a brittle material, installation and use should pay attention to safety, use according to the specific conditions of the heated object, take the necessary protective measures to avoid mechanical damage.