Resistance To Acid Corrosion PTFE Immersion Heater

Product description

To construct Resistance to Acid Corrosion PTFE Immersion Heater with a good corrosion resistance that can be used to heat a variety of corrosive liquids, choose high-quality stainless steel (SUS316 or SUS304) for the inner core and PTFE for the outside tube. The position in which Resistance to Acid Corrosion PTFE Immersion Heater is installed must be carefully considered to avoid the solid in the solution depositing on the heater's surface. Likewise, if the liquid is too thick or the liquid level is too low, the PTFE tube (PTFE) will burn due to insufficient heat dissipation on the surface. 3. The form is broken down into "L," "1," "circle," "m," and so on, which are heated vertically and from the bottom.

Advantages

1.Resistance to Acid Corrosion PTFE Immersion Heater Adopt high quality sheath materials 

2.Precision helical wound nickel-chrome resistance wire. 

3.High purity magnesium oxide powder to provide better heat conductivity 

4.For the best current carrying capability, helical resistance wire is integrally cold pin fusion welded to it.

5.A positive connection of the lead wire to the terminals is made by a threaded screw termination with a ceramic or mica insulator.

Product Application

1.Plastic processing machinery

2.Water and oil heating appliances

3.Packing machine

4.Vending machine

5.Dies and tools

6.Heating chemical solution

7.Ovens and Dryers

8.Kitchen equipment

9.Medical equipment

10.Used in many other appliances

FAQ

Q: Where is your factory located?

In Shenzhen city, Guangdong province, China

Q: When were your factory established?

Our factory had been founding for more than 30 years

Q: What is your main market?

Europe, The North America, South America, Australia, The middle east, and etc.

Q: How many square meters of your factory?

More than 10000 square meter.

Q: What is the delivery time for mass production?

About 7-15 days.

Q: Can you use PTFE on immersion heater?

The metal of PTFE immersion heaters is not exposed to the corrosive solutions they heat since they are sleeved in the PTFE compound. You may heat chemicals with a pH rating of up to 13 by using an immersion heater that has PTFE sleeved around it.

Q: What is a Teflon heater?

PTFE heaters can offer clean, non-stick thermal transfer intended to endure demanding applications such as acid baths, medical equipment, and commercial appliances where traditional metal-clad heating elements are not robust enough to do the job.

Q: What is the lifespan of an immersion heater?

Before it burns out and needs to be replaced, an immersion heater may endure for two to three years. This time range does differ across water heater brands and types.

Q: What does a heater sheath do?

Sheathed heaters are reliable, cost-effective heaters that can deliver high temperatures of heat with a rapid reaction that is not possible with conventional heaters. The metal-sheathed component may be welded, bent, silver-alloy soldered, or cast into a metal block.