Metal Electric Immersion Heater

Product Detail

We offer a variety of materials to match your application (titanium, stainless steel 304 or 316, and plain steel) in sizes up to 36KW. Standard and custom configurations for over-the-side and bottom installations in open tanks. Thermal overtemperature protection standard (except screw plug), and our certifications include CE.

Product Descriptions:

1. The heaters are made of SUS304, SUS316 or titanium tubes with the shapes classified into vertical shape, "L "shape, "Z" shape, etc.

2. Power of the heater is designed according to installation location, liquid chemical properties and deposition of the solid-like contents in liquid.

3. Heaters of different power with different hot zone length and the cold zone length is flexible basing on customers' equipment requests. For safety design principle, hot zone of the heaters should be at least 100mm below the liquid level of the chemical plating tank.

4. Heaters power range from 500W to 36000W, voltages from 110V to 480V, both single phase and three phases are available.

5. All heaters are matched with overheat protection switch or PT100 heat detector.

6. All heaters are CE certificated with international quality standard, which insure the service life.

Metal Electric Immersion Heaters are the most highly versatile process heaters available to design engineers for countless solutions. They are widely employed in industry to heat liquids and gases in tanks, plenums, or pressurized vessels. Our Flanged Immersion Heaters are built specifically for industrial applications, such as: Process Manufacturing Tanks, Boilers, Steam Generators, Sterilizers, Autoclaves, Parts Washers, Beer Brewing Tanks, Baking Ovens and more.

Metal Electric Immersion Heaters are powered by electricity, whether single or three phase, we have a solution. This means they are the 'Green solution' as they are environmentally friendly - there are no fuel emissions requiring carbon offsets or unpleasant residue. Our Elements are also energy efficient - the heater is immersed into the medium where energy is directly transferred, reducing heat loss. Eichenauer offers a simpler alternative compared to a complicated combustion heater.

The design of the Flanged Heater consists of several hairpin bent tubular elements extending from the face of the flange. Each tubular element contains a metallic sheath, an inner heating coil and compacted magnesium oxide as the electric insulation material. The bent tubular elements are joined securely into the flange and bolted to a mating flange integral to a tank or pressure vessel wall. The flange dimensions, thickness and material are determined by the application and are typically rectangular or round, or manufactured to your specific design.

Metal Electric Immersion Heaters are available in 316Ti stainless steel, and INCOLOY and can be mounted to our standard 2.5", 3.0", 4.5" or 5.75" square flange or a 6" round flange in either carbon or stailness steel, or customized to your application. Corrosive liquids typically use stainless steel or INCOLOY to avoid any scaling and resist corrosion, extending the longevity of the heating element. Passivation is offered for these products - chemically passivated sheaths increase corrosion resistance and reduce the chance of a failure.

Metal Electric Immersion Heaters are easy to install and require a minimum amount of maintentance.

FAQ

Q1: Are you trading company or manufacturer ?

A: We are factory.

Q2: How long is your delivery time?

A: Generally it is 5-7 days if the goods are in stock. or it is 10-15 days if the good are not in stock, it depends on quantity.

Q3: What is your terms of payment ?

A: Payment<=1000USD, 100% in advance. Payment>=10000USD, 50% T/T in advance ,balance before shipping.

Q4: Is it OK to print my logo?

A: Yes. We also can OEM.