PTFE, PFA, FEP, Fluoropolymer Heat Exchangers

Product Detail

Features and Benefits

SUPERIOR CHEMICAL RESISTANCE: For heating or cooling of most aqueous acid and alkaline solutions. Check solution guide or consult with your chemical supplier for proper sheath material selection.

RUGGED CONSTRUCTION:
• All wetted parts of fluoropolymer (FEP, PFA or PTFE) construction.
• Heavy duty CPVC mounting bracket.
• 1/8-inch thick perforated guard helps protect the coil from damage.

OUTSTANDING PERFORMANCE: Heavy wall tubing improves circulation and minimizes pressure drop. Larger coils constructed of ½-inch (13mm) tubing, smaller coils have ¼-inch (7mm) tubing.

LEAK-FREE OPERATION: Integral inlet and outlet manifolds for single point connections greatly reduce the potential for leaks and simplify installation.

PRESSURE RATING:
• Standard coils are made from FEP (Fluorinated Ethylene Propylene) and rated up to 30 PSI steam service.
• PFA (Perfluoroakoxy resin) coils are available for steam service up to 60 PSI.
• 10 PSI minimum steam pressure required for operation.
• Consult factory regarding pressure reduced applications.

NON-CONDUCTIVE: Eliminates stray currents in the tank.

SIZES: 5.5 ft2 to 120 ft2 of exchange area standard.

NOTE: Vacuum breakers recommended for fluoropolymer heat exchanger steam heating installations. Please consult factory regarding pressure reduced steam applications.

PTIONS AVALABLE:

• Anti-floatation brackets.
• Special sizes.
• Special manifold configurations.
• L-shaped configurations for bottom heat applications.
• Dual coils for both heating and cooling.