Threaded Boiler Heaters Flange Screw Plug Immersion Heater

Product description

Brazing or welding components into a hex pipe thread creates Screw Plug Immersion Rod Water Tubular Heater. These are made to be dipped directly into liquids and gases. A threaded port in the tank or vessel must be used to mount the heater. A range of pipe thread sizes and materials are available for water heating elements. A variety of materials are available for the water components, making them suitable for a range of fluid heating applications. There are terminal housings for hazardous, indoor, and outdoor settings. There are many of alternatives. We are a made-to-order business, therefore we can provide a wide range of sizes and combinations. Please get in touch with us if you need help with your application.

Advantages

1.Virtually 100% energy efficient

2.Provide uniform temperature

3.Can be formed and shaped into various geometries

4.Easy to install, remove and maintain

5.Oxidation and corrosion resistant

Product Application

1.Plastic processing machinery

2.Water and oil heating appliances

3.Packing machine

4.Vending machine

5.Dies and tools

6.Heating chemical solution

7.Ovens and Dryers

8.Kitchen equipment

9.Medical equipment

10.Used in many other appliances

FAQ

Q: When can I get the price?

Usually we quote within 24 hours after we get your inquiry.

Q: What about the lead time for mass production?

Honestly, it depends on the order quantity . Always 7-15 days based on general order .

Q: What is your terms of delivery?

We accept EXW, FOB, CFR, CIF, etc. You can choose the way which is the most convenient or cost effective for you.

Q: What is the payment way?

1)TT or Western Union for the trial order

2)ODM, OEM order, 30% for deposit,70% against the copy B/L.

Q: What size thread is an immersion heater?

Immersion heater elements generally use a 2-1/4 inch BSP size thread. BSP thread sizes are measured a special way, Contact me for more information. A male 2-1/4 inch BSP thread measures about 65.7mm on the scale of a ruler.

Q: Are immersion heaters standard size?

The most typical size is  11" elements are used to heat only the top of the cylinder. In addition to the 11" & 27" pieces, there are additional 14", 18", 30", and 36" elements available. The element should typically be 3 to 6 inches shorter than its maximum physically allowable length.

Q: Are all immersion heaters the same size?

Measuring from the bottom of the brass boss to the end of the heating element is the only method to accurately determine the length of your immersion heater. However, if your immersion heater is installed in the hot water cylinder's side wall (horizontally), it will typically measure between 11 and 16 inches in length.

Q: How do I choose an immersion heater?

To sum up, there are three things you must do to get the greatest immersion heater: specify the appropriate sheath material for the hot fluid, provide the appropriate power density (i.e., the number of watts per square centimeter or inch), and Choose a wattage that will heat your fluid to the appropriate temperature.