Ceramic Heater Band

Ceramic heater band is made of stainless steel skin, which stand out in the electric heating industry. It is made of stainless steel skin, and the resistance wire is put into the ceramic with higher insulation and fire resistance, and then it is formed by mechanical twisting, and it can be used when it is connected to the power supply.

Feature of Ceramic Heater Band:

30-second rapid heating to 500 degrees

The PTC heater's thermal efficiency is 1.5 times higher, at more than 90%.

The wattage ranges from 50W to 2000W.

The look does not limit the form (can be customized)

using honeycomb ceramic heater components made with the most recent foreign technology

Fearless about water, acid, and alkali

Ceramic sheet heating produces no red light, no burning, and a quick temperature rise that can reach 500 °C in less than 30 seconds.

The unnamed fire below can deodorize and maintain fresh interior air at 500 °C while without oxidizing, consuming oxygen, or drying the lips and tongue.

It has an emissivity of up to 91% and may release radiant heat and far-infrared radiation.

It can emit far infrared rays and radiant heat, and its emissivity is as high as 91%.

It does not burst when exposed to water, is acid and alkali resistant, and is suitable for use in harsh environments.

There is no inrush current when starting, and the temp can be kept at a constant temp.

Advantage of Ceramic Heater Band:

30-second rapid heating to 500 degrees

The PTC heater's thermal efficiency is 1.5 times higher, at more than 90%.

The wattage ranges from 50W to 2000W.

The look does not limit the form (can be customized)
1. The work is safe, the temperature does not leak outside, power can be saved, and the exterior cover does not get hot to the touch.

2. High temperature resistant European and American heating wire, which can be utilized at temperatures between 600 and 800 °C for extended periods of time and has the advantages of rapid heat dissipation, uniform heating, and high temperature stability, among others.

3. The product has a lengthy shelf life due to the raw material's slow aging at high temperatures.

4. Meet the technical requirements of national GB. Power deviation +5%∽-10%.

5. Electric strength: After a 1500v/50Hz sinusoidal AC voltage test, there is no breakdown after 1MIN.

6. It is easy to install and maintain. Even if the internal heating material is damaged, the external ceramic components can still be reused.