Brass Nozzle AC 110V 25mm Band Heater

Brass Nozzle AC 110V 25mm Band Heater is completely against external agents such as melted plastics. They are very resistant to wearing and shocks.High watt-density per square centimeter allows a fast and safe reaching of required working temperature. Brass sealed nozzle heaters are submitted to...

Send Inquiry

Description

Brass Nozzle AC 110V 25mm Band Heater is completely against external agents such as melted plastics. They are very resistant to wearing and shocks.High watt-density per square centimeter allows a fast and safe reaching of required working temperature. Brass sealed nozzle heaters are submitted to extremely high pressure that ensure high insulation, excellent thermal exchange, lack of internal voids, perfectly smooth contact area for an optimum and uniform heat transfer to every part of the nozzle.

Diameter	25mm - 150mm
Height	25mm - 70mm
Electric Heating Wire	NiCr2080
Insulation	Mica
Sheath	Brass
Max Operation Temperature	500℃
Thermal protection	Built in Type "J" (or) "K" Thermocouple
Ground wire	Optional

Material of Brass Nozzle AC 110V 25mm Band Heater

– Brass tube
– Nickel-Chrome 80/20 resistive winding
– Continuous mica insulation
– Flexible bipolar feeding lead + earth wire
– Teflon-fibreglass insulated nickel conductors, with metal braiding protection Max working temperature is 500ºC

Features of Insulated band heaters

– Available in Premium, Economy & Power Saving Options Available
– Conserves Energy with improved Heating Efficiency Up to 30 Watts per square inch.
– Superior Thermal Conductivity and die electric strength.
– Available in various Lead Terminations & Clampings

How to order ? Pls provide this informations:

1.Vottage :380V,240V, 220V,200V,110V and other can be customized.
2.Wattage :80W,100W,200W,250W and other can be customized.
3.Heater Inside Diameter :20mm, 30mm, 40mm, 60mm, 80mm, 100mm and other can be customized.
4.Heater Height :30mm, 40mm, 60mm, 80mm, 100mm and other can be customized.
5.Whether you need holes or not. If yes, it is necessary to provide holes' quantity, size and position.
6.Termination Stype :screw terminal, plug terminal, ceramic block terminal or lead wire terminal.