35X35mm 110v/ 220v Brass Nozzle Heater Band for Blow-molding Machines Brass nozzle band heater are available in a variety of designs and styles suitable for different applications. The connection between the heating element and the leads is protected by a special fitting made of brass 1 mm...
Description
|
Power Tolerance
|
+5% to -10%
|
|
Resistance
|
-5% to +10%
|
|
Insulation Resistance (Cold)
|
≥20 MΩ
|
|
Leakage current
|
<0.75 mA/kW
|
|
Thermocouple
|
K/J-type with/without
|
|
Sheath Material
|
Brass/Copper for ceramic band heater
|
|
Connection Method
|
High temperature cable
|
|
Connection cap
|
axial 30°, centred on the height of the band heater, up to 38 mm height. Over 38 mm height, it is placed at 20 mm from the edge.
|
|
Lead Wire Terminals
|
1.Stainless steel braid: stright lead exit/ low profile terminal cover/ used mostly with nozzle heaters/ 180° from gap/ heat shrink sleeving
2.Plain lead wire: straight lead exit/ exiting both sides of the gap/ used 3.mostly with nozzle heaters/ 180° from gap
4.Teflon insulated wire
5.Fiberglass insulation wire
|
1. Specific wattage up to 6 W/cm2
2. Working temperature 300/320°
3. Available, upon request, with built-in thermocouple J
4. Feeding lead lenght over 1000 mm upon request
5. Standard model with axial exit 45°
6. Available, upon request, radial exit, or tangential exit 45°or 5°, or axial exit 5° or 30°
7. Standard feeding voltage 230 V
8. Different voltage and wattage, upon request
9. Available upon request, it is manufactured with hole and threaded support for thermocouple
Send Inquiry
You Might Also Like
Shopping Bags
