Can I add water to test the electric fryer?

Can I add water to test the electric fryer?

1. If it is a test machine to test whether the heating function of the fryer is normal, water is the best, so it is easier to clean. Avoid mixing water and oil.

2. Adjust the amount of oil according to the size and time of your own fried food. If the amount of use is large, adding more for the first time will have a better effect on the frying of the food.

3. If the frying time is long and the oil temperature is high, it should be suitable for power off. Make good use of high fire to heat low fire to fry food, which saves electricity and extends the life of the fryer. If there is a sudden non-heating situation, first check the temperature control switch, because the temperature is too high, it will automatically shut off the valve, and the heating function will automatically resume when the temperature drops.

Before use, you must check whether the power supply is installed properly to ensure that the power supply voltage is consistent with the voltage used by the electric fryer. When using, keep the oil level in the cylinder greater than 1/2 the cylinder depth as normal. Plug in the plug, turn on the power switch, and turn the thermostat clockwise to align the required temperature scale value with the red dot. At this time, the yellow indicator light is on, indicating that the electric heating tube is working and the oil in the cylinder starts to heat up; when the temperature is When the temperature rises to the required temperature, the thermostat can automatically cut off the power, and the yellow indicator light goes out, and the electric heating tube stops working; when the oil temperature drops slightly, the thermostat can automatically switch on the power, the yellow indicator light is on, and the electric heating tube is again When work resumes, the oil temperature rises.

www.superbheater.com