Characteristics and advantages of fiberglass heating belts

Characteristics and advantages of fiberglass heating belts

The heating element of the glass fiber heating belt adopts nickel chromium alloy strips and wires, which have the characteristics of fast heating, high heating efficiency, and long service life; The insulation layer adopts multi-layer alkali free glass fiber, which has good temperature resistance and reliable insulation performance. The product has a soft structure and can be directly wrapped around the surface of the heated part during use. The heating temperature is uniform, the installation is simple, the use is convenient, and it is safe and reliable.

Product advantages:

1. The maximum temperature resistance can reach 450 degrees, and the operating temperature is 200 degrees. Compared to silicone rubber heating belts, they have higher temperature resistance and stable performance

2. Glass fiber heating tape has good softness and can fully adhere to the surface of the heated object

3. The heating wire is made of high-quality nickel alloy wire, with uniform heating and long service life

Main characteristics and applications of various grades of aluminum alloys for cast aluminum heaters

1. ZL101

The composition is simple, easy to melt and cast, with good casting performance, good airtightness, and good welding and cutting performance, but the mechanical properties are not high. Suitable for casting various parts with thin walls, large areas, complex shapes, and low strength requirements, such as pump shells, gearboxes, instrument shells (frames), and parts on household appliances. Mainly used are sand casting and metal casting.

2. ZL101A

Due to the addition of trace amounts of Ti on the basis of ZL101, the grains are refined and the microstructure of the alloy is strengthened. Its comprehensive performance is higher than that of ZL101 and ZL102, and it has good corrosion resistance. It can be used as high-quality castings for engineering structural components under general loads and various structural components on motorcycles, automobiles, home appliances, and instrument products. Its usage is currently second only to ZL102. Sand and metal molds are often used for casting.

3. ZL102

The biggest characteristic of this alloy is its good flowability, and its other properties are similar to ZL101, but its airtightness is better than ZL101. It can be used to cast various complex and thin-walled die castings, as well as thin-walled, large-area, and complex shaped metal or sand castings with low strength requirements. Whether it is die-casting parts, metal mold, or sand mold castings, they are the most commonly used variety of cast aluminum alloy in civilian products.

www.superbheater.com