Complete list of dryer malfunctions

1. The dryer does not rotate. The motor of the dryer is burnt out, the belt is loose, and the power plug is loose, all of which can cause it to not rotate. If the dryer motor is burnt out, it can only be replaced with a new one. If the power plug of the dryer is loose, just plug it in tightly. If the belt is loose, replace it with a new one. It should be noted that it is best to find a professional maintenance technician to replace the motor.
2. The temperature of the dryer is very high. The excessive temperature of the dryer may be caused by the reversal of the dryer blades and the burning of the heating tube. The solution is for people to turn the motor of the dryer in another direction, adjust the fan blades, and then replace the heating pipes and wires of the dryer according to the actual situation.
What to do if the dryer doesn't rotate_ Complete list of dryer malfunctions
3. The dryer is noisy. Loose components, loose installation, loss of oil in bearings, and loose bolts in bearing seats can all cause loud noise in the dryer. The solution is to tighten the loose components in the event of a power outage, install them firmly, and replace the bearings with fixed bolts.
4. The dryer brake is malfunctioning. This situation is mainly caused by severe wear on the belt of the dryer, and people can replace it with the same type of belt.
5. After the dryer is powered on, the heating tube does not work, but there is air at the air outlet. In this situation, people should check if the heating tube is blackened or damaged, and replace it if it is damaged. If not damaged, check if the heating relay is broken, and if so, replace it with a new one.

The above content is organized by Superb heater Company, super heater. Mainly professional production: industrial heating elements, temperature measuring elements, production equipment, accessories, and raw materials such as tubular heaters, tubular heaters, belt heaters, ceramic heaters, silicone rubber heaters, thermocouples, etc.

Welcome global industry partners to discuss cooperation!