Duct Heater Installation Precautions

Recoil the built-in heater and the temperature measurement cable in the heater's internal system separately and place them on the cable rack inside the heater. First, thread the spherical tail of the cable in the heater's internal system through the stud hole in the branch pipe flange and out through the pipe used to connect the heater. After this, it can be inserted into the opening in the oil pipe of the heater's internal cable, creating a preheating condition on the heater coil.

Duct heaters are one of the most frequently used electric heating devices in our production processes. Their contribution to heating is obvious. So, what should we pay attention to when installing duct heaters?

1. Install the duct heater in a well-ventilated location and avoid using it in a sealed box.

2. The air outlet duct and the air delivered by the duct heater can be very hot. Be careful to avoid burns.

3. Before using the heater, be sure to check that the voltage and current meet the machine's requirements. Always use a grounded socket and ensure that the electrical wiring meets the requirements.

4. Do not operate the heater in areas exposed to water or high humidity. Water splashing onto a running heater may cause a short circuit or electrical leakage.

5. In the event of an emergency, simply press the emergency stop button to shut down the heater. Reset the heater only after ensuring safety.

6. Do not place the heater directly near an electrical outlet, and do not touch the heater's internal heating elements with your hands to avoid potential danger.

7. Install the heater away from flammable, explosive, or other hazardous materials and gases to prevent potential danger.