Electric heating tube/device for dry burning of electric heating tubes

Electric heating tube/device for dry burning of electric heating tubes

With the increasing emphasis on environmental pollution prevention and low-carbon economic development in society, electricity, as a widely used energy method, has its advantages in terms of safe and convenient transmission, economic cost, and convenient use. Therefore, as a common electric heating element, electric heating tubes have been widely adopted in various industries. So how should you choose the appropriate electric heating tube/device according to your actual usage? Below is a brief introduction to the selection of electric heating tubes/devices based on their specific usage:

According to the general usage classification, it can be divided into three types: dry burning electric heating tubes, liquid heating electric heating tubes, and special medium heating electric heating tubes:

1、 Dry fired electric heating tube/device

According to actual use and process environment, it can be divided into the following four types:

1. Heating and drying process environment:

Applied to drying rooms, paint drying rooms, drying furnaces, drying machines/boxes and other operating equipment, commonly used for heating and drying various materials (such as wood, paper, printing and dyeing, paint, various particles, and other materials).

Non standard electric heating tubes, finned electric heating tubes, infrared quartz electric heating tubes, air electric heaters, etc. can be selected.

2. Working conditions such as air duct, hot air circulation, high-temperature heating, dehumidification, etc.: further refined based on the heating and drying process.

Applied to industrial electric auxiliary heating, environmental protection equipment, air duct heaters, hot air circulation pipelines, heaters, and other operating equipment.

Generally, finned electric heating tubes, duct type electric heaters, and electric heating coils are commonly used.

3. Heating of solid metal objects:

Used for heating metal materials, commonly used in extrusion, injection molding, casting molds, stamping molds, packaging, sealing machines, etc.

Single head heating pipes, mold electric heating rods, heating strips, casting electric heaters, etc. can be selected.

4. Solid hot melt working environment:

1) Low melting point metal hot melting: melting tin, aluminum, zinc, lead, etc

2) Non metallic hot melting: The melting of paraffin, saltpeter, and other salt substances.

Solid hot melt high-temperature electric heating tubes can be used, and small ones often use single head electric heating rods.

Www.superbheater.com