Four malfunctions of the water dispenser

1. The water dispenser has a long heating time and low temperature
When people's water dispenser fails to heat or takes a long time to heat, but the water temperature is still very low and does not boil, it indicates that the temperature controller of the water dispenser has malfunctioned. In this situation, people need to hire professional personnel to repair and replace the temperature controller with a new one.
2. The heating light of the water dispenser does not light up and does not heat up
When this situation occurs, people first check if the power plug of the water dispenser is loose, and if it is plugged in tightly. If not, check if the plug is damaged and plug it into another socket to see if it can be powered on. If it can be powered on, it indicates that there is a problem with the power supply. People need to find professional personnel to inspect and repair power lines.
If it is not caused by the above two reasons, it is possible that the safety tube inside the water dispenser is burnt out by the current, or the circuit board is burnt out. People can replace the safety tube or circuit board with a new one.
3. Water dispenser leakage
Leakage of water dispensers is generally caused by damaged power lines, metal wires leaking out, or poor grounding of the water dispenser. To avoid this situation, people must use a reliably grounded three hole socket and install a leakage protector.
4. Water dispenser cold and hot water temperature linkage
This situation is generally caused by two reasons, with different solutions for different reasons.
① If the water level in the base of the water dispenser is full or even exceeds the hot water outlet, people should check whether the float valve of the water dispenser is installed properly. If it is not installed properly, then check to see if the problem has been resolved.
② There is a problem with the "one-way valve" on the connecting pipe of the hot water tank in the base of the water dispenser, which causes the cold and hot water to flow together. The solution is to replace the "one-way valve" of the same model.

The above content is organized by Superb heater Company, super heater. Mainly professional production: industrial heating elements, temperature measuring elements, production equipment, accessories, and raw materials such as tubular heaters, tubular heaters, belt heaters, ceramic heaters, silicone rubber heaters, thermocouples, etc.

Welcome global industry partners to discuss cooperation!