Heat transfer characteristics of fuel heated heat treatment furnaces

Heat transfer characteristics of fuel heated heat treatment furnaces

In response to the large heat dissipation loss and poor rapid heating performance of the original furnace lining, in order to reduce equipment energy consumption and improve the adaptability of the equipment heat treatment process, an insulation layer mainly composed of aluminum silicate refractory fiber material is used on the inner wall of the furnace lining. Practice has shown that it also has a considerable degree of vibration absorption effect in the composite furnace lining

KANTHAL 1800 Specific Molybdenum Disilicide (MoSi2) Heating Element

1. Ultra pure molybdenum disilicide (MoSi2) heating elements can be produced in special shapes according to customer requirements, especially suitable for furnaces with high purity requirements

2. The temperature should not exceed 1800 ℃

3. Long service life, easy replacement, high furnace utilization rate, and low maintenance cost

Product advantages:

1. The product is antioxidant and has automatic repair function, suitable for continuous use in various oxidation atmospheres

2. Hot working forming maintains the high temperature toughness and plasticity of the substrate material, with standardized specifications and geometric shapes. It can also produce special shapes and sizes according to customer requirements, meeting various installation needs of users

3. In terms of cold and hot end welding, a special process is used for docking and forming, so the welding points are firm, have strong impact resistance, and will not be damaged by the current impact generated during power on and off, and will not break due to transportation and installation

4. The product has high density, fast heating, and the component heating rate can reach over 100 ℃/min

5. It can achieve rapid cooling

6. Uniform thermal field inside the furnace

7. The material purity of the heating element is high, the protective film of the heating element is dense and complete, and the high-temperature stability is good, avoiding contamination of the products in the furnace

8. High temperature strength, less prone to deformation during use

Www.superbheater.com