How to deal with water leakage in an electric iron? Can it still be used if it leaks?

How to deal with water leakage in an electric iron?
The electric iron leaks before it is plugged into the power supply, indicating that its spray button has been in the pop-up state. Therefore, the water in the electric iron will directly leak out from below. At this time, people can press the spray button back and adjust the gear of the electric iron to 0, so that the electric iron will not leak.
The handle of an electric iron has a drip switch, and when people press it once, water will drip out. When the temperature of the electric iron is too high, water vapor will spray out from the bottom hole and will not leak. But if the temperature is too low and the water cannot evaporate, it will cause water leakage. At this point, people only need to press the drip switch again to prevent water leakage.
If people press the spray button when the indicator light of the electric iron is on, the water will not be atomized and leakage will occur. At this time, people only need to press the spray button again when the temperature control indicator is off.
Can the electric iron still be used if it leaks water?
If people's electric irons leak from the bottom, they cannot continue to use them because there is a risk of electric shock due to water leakage from the bottom of the iron, which can cause people to get electric shock if they are not careful.

The above content is organized by Superb heater Company, super heater. Mainly professional production: industrial heating elements, temperature measuring elements, production equipment, accessories, and raw materials such as tubular heaters, tubular heaters, belt heaters, ceramic heaters, silicone rubber heaters, thermocouples, etc.

Welcome global industry partners to discuss cooperation!