How to install a heat lamp? How to use a fish tank heat lamp

How to install the heat preservation lamp?
1. It must be installed by an electrician to ensure the safety of electricity use and not to induce electrical maintenance operations.
2. It must be installed horizontally, and it is forbidden to cover the cover in any way during work.
3. It is forbidden to use it in environments with high humidity, flammable and explosive materials, etc.
4. Regularly wipe the aluminum reflector to keep it in a clean state and ensure good infrared reflection.

How to use the fish tank heat preservation lamp
1. In North China, there is a wide supply of stable radiators in winter. During the central heating period, the indoor temperature is not low, as long as the fish tank is placed in the heat dissipation place of the indoor heating pipe and other heating equipment. In areas without central heating, if the room is heated by central air conditioning all day in winter, putting the fish tank in the room can also prevent freezing.
2. If there is no stable heating in the room, the most appropriate insulation method is to use an aquarium insulation heater, which can automatically control the temperature to prevent the temperature from being too high or too low. Put the insulation heater in the fish tank, set the temperature parameters according to the suitable living and living temperature of freshwater fish, and then connect the power supply to keep warm.
3. If it is difficult to buy automatic temperature control equipment, for large fish tanks, you can directly use heating tubes for insulation. Because the heating tube is continuously heated, it cannot automatically control the temperature. Therefore, the fish tank must be large enough, and the water should be more. The output power of the heating tube should be smaller, and it should be better than continuous heating without boiling water. Otherwise, not only will the power consumption be high, but also fish head soup will be made. If there is manual on-site monitoring, you can ignore these. In addition, the quality of the purchased heating tube must pass the customs, otherwise the fish will be frozen to death if it is burned, and the fish will be electrocuted if the electricity is lost. In order to prevent the heating tube from burning the fish, it is best to use a container to hold water, then put the heating tube in the container, and finally put the container in the fish tank, so that the water in the fish tank can be prevented from overheating to a certain extent.
4. If the working temperature is very low, heating the fish tank alone is not a solution. It is also necessary to prevent the heat pipe of the fish tank from dissipating too quickly, especially in large fish tanks. You can stick layers of insulating materials such as heat-insulating foam plastics on the outside of the fish tank, and then cover the mouth of the fish tank with an outer cover. If the fish tank has an oxygen-generating device such as an aerator, you can cover the mouth tightly. Otherwise, you can't cover the mouth of the fish tank too tightly. You must leave a gap to prevent the fish from suffocating.
5. For small fish tanks, you can use light bulbs to keep warm. Hang an incandescent bulb on the top of the fish tank, and turn on the light when you need to prevent freezing. According to the working temperature and the size of the fish tank, you can use light bulbs of different output powers. Using electric light bulbs for heating can prevent the fish from being scalded to death by excessive heat.