How to install single head, U-shaped, and flange heating pipes

How to install single head, U-shaped, and flange heating pipes

1、 Single head heating tube:

1. Conventional single head heating pipe: Common single head pipes do not require special fixed installation and can be directly placed in the heating channel for heating, or fixed with a bracket for heating.

2. Baffle type single head electric heating tube: Baffle type single head tubes generally require a hole diameter on the installation surface to allow the electric heating tube to pass through, and the baffle serves as a fixed support; The baffle type single head electric heating tube is installed horizontally and vertically, and when installed horizontally, the baffle mainly serves to protect the lead wire.

3. Thread type single head electric heating pipe: Thread type single head heating pipe refers to welding an installation thread on the original heating pipe for installation and fixation. Common installation involves drilling a threaded hole in the area that needs to be installed, and then the electric heating pipe can be fixed and installed in that area with the thread. The advantages of using threads are convenient installation, easy replacement, good sealing effect, and good stability. (There are generally several types of threads, such as 6 inches and 1 inch)

2、 U-shaped heating tube:

1. Fastener installation: The common installation method is to use fasteners. The installation method of fasteners requires a suitable hole diameter, and the fasteners mainly include threaded fasteners. For stable installation, gaskets can be added to achieve better installation results. The main benefits of fastener installation include easy installation, good stability, easy replacement, and wide range of use.

2. Support fixation: When the electric heating pipe is installed horizontally or with a long length, simply using fasteners for installation can cause installation instability, and the fasteners cannot bear the weight of the pipe and are prone to damage. Therefore, supports are often used for fixation to ensure installation stability and service life.

3、 Flange heating pipes: According to the installation method, flange heating pipes can be mainly divided into two types: flat flange and threaded flange.

1. Flat flange: The flat flange electric heating pipe mainly has several bolt holes left on the flange for bolt fixation. For the installation of the flat flange, the prepared mother flange needs to be welded to the location where it needs to be installed, and then the flange of the heating pipe and the mother flange are fixed and welded. When strict sealing is required, a sealing gasket can be used for installation.

2. Screw thread flange: Screw thread flange refers to the installation of screw threads on top of conventional flange heating pipes. There are generally two sizes of screw threads: one inch and one and a half inches. The installation of screw thread flange requires a threaded hole diameter to be punched at the installation site, and then the screw thread flange can be directly installed and fixed by rotating through the screw hole.

Www.superbheater.com