How to maintain the plastic hollow blow molding machine

Maintenance method of plastic hollow blow molding machine
1. Maintain the key components of the hollow blow molding machine. It mainly includes a series of environmental protection components such as waterproof and anti-corrosion of the hydraulic control system of electronic equipment, convenient conversion between wires, stable maintenance, stable operation of standard voltage and current of power circuit, and compliance with requirements. Maintenance of screws between partial wetting of parts, load sharing and tightening of studs; Reliability of hydraulic transmission system, component upgrading, working and storage temperature and ash removal maintenance.
2. Maintain other relevant parts. It is mainly about the wiring and cleanliness maintenance of the heating film around the raw material pipe; The working temperature and steam pressure of the cooling tower and the cleaning problems in the preparation of the field.
3. Application and practical operation basis. The actual operator should point to the passage of mechanical equipment to avoid accidental damage to the electric heater, electric heater circuit and raw material resources.
In addition to the above new items for thermal fixation and cleaning of power supply circuits, the following daily maintenance is also carried out during the whole process of applying the hollow blow molding machine: temperature system software inspection, all normal operation inspection of the automotive engine system software, cylinder pressure inspection, raw material purity inspection, common fault protection inspection of switching power supply, safety risk, such as power on.
For the maintenance and common troubleshooting of the hollow blow molding machine, a large number of daily inspections and maintenance are required to avoid the immediate removal of the root causes in an emergency and make appropriate choices; In case of common fault, press and hold the direction change, cut off the switch power supply and stop the operation; Reporting and tracking. In addition, technical professionals should be equipped or found to carry out immediate inspection, maintenance, actual operation and maintenance of mechanical equipment, so as to quickly and reasonably find the direct cause, solve the emergency, quickly maintain and restore production, and improve the overall efficiency.