Inspection and maintenance of blown film machine

Machines, like humans, also require moisturizing, maintenance, and related movements, otherwise various minor problems may occur. In order to make the blown film machine durable and have a long service life, it is necessary to maintain and upkeep it. Below, we will learn about several points for inspecting and maintaining blown film machines:
1. Check for dirt and ensure simplicity during operation.

2. Check the traction speed and control the film thickness.

Observe and adjust the uniformity of the film thickness, and ensure that the bending diameter meets the standard.
4. Check the pressure of the air storage cylinder, it should not be too high, but there should be a backup pressure.
5. Check and control the proportion of raw materials and mix them evenly.
⒍ Check for impurities in the raw materials, especially by promptly using a magnet to check for any iron mixed in.
7. Check the lubrication condition of the gearbox position and air compressor cylinder lubricating oil.
Regularly check the temperature rise and mechanical transmission of each operating motor.