Nozzle temperature and mold temperature of vacuum forming machine

Nozzle temperature and mold temperature of vacuum forming machine

The temperature that must be controlled in the injection molding process of the vertical injection molding machine includes the temperature of the barrel, the temperature of the nozzle and the temperature of the mold. The first two temperatures critically affect the plasticization and fluidity of plastics, while the latter temperature critically affects the fluidity and cooling of plastics.

Vacuum molding machine injection molding machine does not lock the treatment method:

1): Check the travel switch in front of the safety door and repair it.

2): Check the 24V5A power supply in the electrical box, and replace the fuse and power supply box.

3): Check if the valve core is stuck and clean the valve core.

4): Check whether the I/O board has output and whether the solenoid valve is electrified.

5): Check whether the hydraulic safety switch is pressed and whether the mechanical lock lever baffle is opened.

The main features of the vacuum forming machine injection molding machine manipulator control system are:

1. The hardware part adopts a modular design, and the general interface is designed by itself to reduce the space occupation of the circuit board as much as possible, and the electrical and mechanical properties are enhanced and the reliability is high.

2. Using enhanced single-chip microcomputer, large-capacity program memory, data memory and flash memory are integrated into one single-chip computer, reducing the number of components on the circuit board.

3. Add anti-jamming measures from both hardware and software aspects to improve the anti-jamming capability of the system.

4. The IAP method is used to store the action teaching and setting parameters of the manipulator, which is convenient and reliable.

5. The ISP module and software modular programming are specially added on the circuit board to facilitate program debugging and subsequent software upgrades.

www.superbheater.com