Home -

Knowledge

  • 18

    Jan-2023

    Temperature control method of high temperature box furnace

    Box-type high temperature furnace is also known as muffle furnace. Using new thermal insulation materials, small size, light weight, good thermal insulation effect, fast heating speed, the panel is ma

  • 18

    Jan-2023

    Features of pusher furnace

    Pushing furnace, zirconia sintering pusher furnace, high temperature pusher furnace, atmosphere pusher furnace are mainly used for the sintering of advanced ceramics and structural ceramics: such as o

  • 18

    Jan-2023

    Installation and use of high temperature box-type resistance furnace

    1. After opening the package, check whether the resistance furnace is intact and the accessories are complete. 2. The box-type electric furnace is placed on a platform or workbench in a dry place indo

  • 18

    Jan-2023

    Pusher furnace temperature control system

    6.1. The temperature control system uses SCR single-phase voltage regulation to control the temperature of the electric furnace, a total of 4 groups. 6.2. The temperature control instrument is importe

  • 18

    Jan-2023

    Vacuum box furnace parameters and furnace body working principle

    1. Introduction to pre-vacuum box furnace The pre-evacuated box atmosphere furnace is widely used in the heat treatment of metal materials in low vacuum, reducing and protective atmosphere; it can als

  • 18

    Jan-2023

    Atmosphere control of pusher furnace mouth

    4.1. The gas used for the gas curtain at the furnace mouth is hydrogen or ammonia decomposition gas. 4.2. When the furnace door is opened, ignite the ignition nozzle of the furnace mouth first. 5. Hea

  • 18

    Jan-2023

    Push plate furnace operation process

    1. Preparation before heating up: 2. Check whether the gas source is sufficient, whether the ammonia decomposition device is operating normally, and whether the cooling water is connected 3. Open the

  • 18

    Jan-2023

    Atmosphere control and water cooling system in the pusher furnace

    3.1. The protective gas is hydrogen or ammonia decomposition gas. 3.2. The shielding gas is divided into 2 air inlets, one of which leads to the furnace lining to provide shielding gas, and the other

  • 18

    Jan-2023

    Pusher furnace inlet and outlet pipe

    2.1. Both the feeding pipe and the discharging pipe are welded from stainless steel plates and connected to the furnace body by bolts. The lower part of the furnace tube is lined with 90 porcelain gui

  • 18

    Jan-2023

    Temperature system operation:

    The user switch board powers the electric furnace. At this time, the program meter is powered, and the meter (such as P, I, D parameters) is set according to the temperature meter manual, and the heat

  • 18

    Jan-2023

    Temperature Intelligent Control System of Experimental Electric Furnace

    1. Temperature control instrument Electric intelligent instrument temperature control, PID automatic adjustment, with over-temperature, segment-couple alarm protection function, and temperature compen

  • 18

    Jan-2023

    Appearance of experimental electric furnace equipment

    1. The electric furnace is made of fine and beautiful appearance. 2. The main color is: decorative cover plate sprayed.