Knowledge

A machine that wraps the product with heat shrinkable film and then heats it to make the film shrink and wrap the product.

The film packaging machine directly heats various specifications of films with far-infrared radiation. The products are transported to the shrinkage furnace through the conveyor belt. The products are

The mechanism is to punch the plastic bubble belt into a plate block packaging finished product, which is mainly composed of an upper crank rod mechanism, a middle template (punch), a die cavity and a

The mechanism includes main motor, tower wheel transmission, cycloid pinwheel reducer and transmission gear, etc. The main motor transmits the supporting force to the rolling die, stepping mechanism a

The mechanism is the intermittent feeding mechanism of blanking process, which is composed of intermittent motion mechanism and stepping roller. The continuous motion of the transmission mechanism is

The batch number is set in the die, there is a long square hole above the die cavity, and a steel word clamp is installed in the rectangular hole. The steel word is connected by the steel word clamp.

The heat sealing anilox roll cooperates with the rolling die to complete the hot pressing sealing of film and aluminum foil. The heat sealing anilox roll is mainly composed of anilox roll compression

It is mainly composed of material, material trough, disc brush, roller brush and DC motor. The material is used to store drugs. Open the ram, the medicine enters the material tank by itself, and then

The key parts of the blister forming machine are matched with the blister forming machine and the sealing roller. The component is mainly composed of rolling die, rolling die shaft, moon valve plate,

It includes two parts: aluminum foil drum and plastic sheet drum. The drum is mainly composed of cylinder, inner and outer stator, brake ring and adjusting nut. Both ends of the cylinder are supported

The fuselage is mainly composed of base and wallboard, which is the main body of the machine to support all other parts.

The main mechanisms of the machine include body, aluminum foil support, forming heating, rolling die mechanism, feeder, PVC support, heat sealing reticulation, stepping mechanism, transmission mechani