Rolling die of capsule packaging machine

The key parts of the blister forming machine are matched with the blister forming machine and the sealing roller. The component is mainly composed of rolling die, rolling die shaft, moon valve plate, vacuum and cooling system. The rolling die is made of duralumin gold. Bubbles are distributed on the surface, and micropores are drilled at the bottom. It is connected with the vacuum suction pipe through the crescent valve plate, so that the plastic film passing through the bubble absorption section is absorbed into a bubble cover after being softened by radiation heating of the heater. The rolling die is sleeved on the rolling die shaft and fastened with nuts. When changing drugs, the rolling die can be replaced as long as the sealing end cover of the rolling die is opened and the nuts are loosened. The shaft core of the rolling die is provided with water inlet and drainage channels. The cooling water enters the rolling die through the water channel to play a cooling role.