Knowledge

The heating resistance wire in the single-head tube is in a spiral shape. When the distance is different, it will heat differently, the distance is close, and the heat is high. The distance is long an

1. Fully understand the operating conditions of the single-head tube, whether it is medium propagation or red inner line radiation. 2. Fully understand the application heat of the single-head tube, an

a： The prerequisite for handling the blackening is to keep the surface of the heating tube clean and tidy. If there are impurities on its appearance, it will not be conducive to the treatment of black

1. Place the recycled electric heater near combustible or explosive materials, and cause a fire under low-temperature baking in a short period of time. 2. The electric heater is not equipped with a pl

1. During the storage and service of the single-head tube, attention should be paid to the waterproofing of the terminal to avoid problems such as leakage and short circuit caused by water entering th

This machine is suitable for polishing and wire drawing of large round tubes of various materials. The feeding wheel is made by grinding three times, mixed with silica gel, resistant to high temperatu

1. First, follow the triangular connection method, that is, according to the three electric heating tubes as a group, the first connection is connected in a triangular shape, so that the wiring power

In the process of selling electric heating tubes, I often encounter customers who judge the quality of an electric heating tube is the length of time it is used. This standard was very important at th

1. The junction of the cold end terminal and the resistance wire should not be at the bend of the heating tube. If the electric heating tube is bent here, the terminal will easily upturn, which will c

1. First of all, when we buy heating tubes, we must list the rated voltages of the electric heating tubes. If the rated voltage of a single tube is 220V and the total power supply is 380V, we will use

A.0.4mm Maximum operating temperature: 950—1000℃ B.0.3mm Maximum operating temperature: 900—950℃ C.0.2mm Maximum operating temperature: 850—900℃ D.0.15mm Maximum operating temperature: 820—850℃

1000 watts current at 220 volts is approximately equal to 3.966 amperes, which is 4 amperes At 380 volts, the current of 1000 watts is approximately equal to 1.998 amperes, which is 2 amperes. As long