Physical properties of plexiglass for vacuum forming machine

Density: 1.19g/cm 3 Light transmittance: 99% Impact strength ≥ 16kg/cm 3 Tensile strength ≥ 61Kg/cm 3 Thermal deformation temperature ≥ 78°C Thermal softening temperature ≥ 105°C, the bonding method of plexiglass should be based on different If necessary, 502 can be used for low-demand, but high-demand chloroform for short is not necessarily the best, acetone is also required, but it is best to use several mixed formulas.