Cutting of Plexiglass Thin Materials in Vacuum Blister Machine

Thin material cutting (2-10mm) plexiglass below 5 mm uses a 50mm focusing lens, the cutting speed is generally 0.35-0.8 m/min, the light intensity is 45-65%, and 5-10mm plexiglass generally uses 63.5 mm focusing Mirror, cutting speed is 0.15-0.3 m/min, light intensity is 50-75%, large area engraving machine, if serious resonance (vibration) occurs during engraving, it will also cause the accuracy of the engraving machine to be greatly reduced, so The width of the plexiglass model should not exceed 1 meter as much as possible, and some white powder is produced during the process of plexiglass engraving the figure image, which makes it feel clearer. It depends on what kind of processing is carried out like a specific effect.