Reasons for Blockage of Butyl Glue Dispenser

The reason for the blockage of the butyl adhesive applicator:
During the gluing process, the center stops for a long time or accumulates multiple times, and cleaning cannot be completed at the end of gluing, especially during high summer temperatures.
2. Lack of air pressure of AB component leads to uneven mixing, slow gel and simple particles
3. Component B has not been inspected and cleaned. Component B is sensitive to water vapor. Due to occasional factors such as transportation and storage environment, the surface of component B may crust, and a part of the shell may be pressed into the pipeline, which can easily cause particles to occur.
4. The filter and one-way check valve have not been cleaned for a long time.
The O-ring on the pressure plate of component B has a long service life and is loose.
Solution for blockage of butyl adhesive applicator:
1. How long does it take to disconnect the adhesive? It is recommended to measure the peeling time before applying the adhesive every day based on the temperature and humidity difference before the disconnection time. In addition, current customers often require the curing time of adhesive to be fast, the stopping time to be longer, and it can easily cause the appearance of particles.
2. The simple solution is to use a scraper to clean the outer shell without affecting the application of glue.
3. Advocate regular cleaning of filters, one-way check valves, static mixers, and glue guns.