The magnesium oxide powder at the outlet end of stainless steel electric heating pipes is protected from pollutants and water infiltration in the use area to prevent leakage accidents from occurring

The magnesium oxide powder at the outlet end of stainless steel electric heating pipes is protected from pollutants and water infiltration in the use area to prevent leakage accidents from occurring

Therefore, stainless steel electric heating pipes have the characteristics of rapid heating, small thermal hysteresis, uniform heating, long thermal radiation transfer distance, and fast heat exchange speed. During the working process, the luminous flux is much smaller than that of metal heating body electric heating pipes. The method to judge the quality of stainless steel electric heating tubes is to wipe the surface of the heating tube clean, then connect an AC 220V power supply, dry burn in the air, turn off the power after the surface turns red, wait for the heating tube to completely cool, wipe with a napkin, and there should be no black oxide powder on the white paper. Stainless steel electric heating pipes should be properly positioned and fixed during use. The effective heating area must be fully immersed in liquid or metal solids, and empty burning is strictly prohibited. When scale or carbon deposits are found on the surface of the pipe, they should be promptly removed and reused to avoid affecting heat dissipation and shortening the service life. The electric heating tube is made of tubular electric heating material as the heating element, and the high-quality aluminum alloy material is used as the casing of the cast electric heater. Its application temperature is usually between room temperature and 350 degrees

Stainless steel electric heating pipes should be placed outside the insulation layer in the wiring section to avoid contact with corrosive, explosive media, and moisture; The wiring should be able to withstand the temperature and heating load of the wiring section for a long time, and excessive force should be avoided when tightening the wiring screws. When heating air, the components should be arranged in a cross and uniform manner to provide good heat dissipation conditions and allow the flowing air to be fully heated. The magnesium oxide powder at the outlet of stainless steel electric heating pipes should be protected from pollutants and moisture infiltration in the use area to prevent leakage accidents. When heating the air with an electric heating tube, the components should be evenly arranged in a cross pattern to provide excellent heat dissipation conditions and allow the air passing through to be fully heated.

Www.superbheater.com