The wiring of the electric heating tube equipment is messy.

The wiring of the electric heating tube equipment is messy.

Many packaging machines (especially vertical sealing models) work in multiple groups or even more than ten groups of independent packaging units at the same time, so there will be many messy wires. Especially the equipment with narrow outlet space of the heating tube wiring often causes the wire to be excessively bent at the outlet of the heating tube.

The solution to the disorderly arrangement of the equipment — choose an electric heating tube with a right-angle outlet. For equipment with multiple outlets and messy wiring, or when the outlet of the heating tube needs to be bent, use a right-angle electric heating tube, so that the wires of the heating tube can be arranged in the same direction, which helps to optimize the overall wiring method of the equipment.

Electric heating tube heating tube wire is easy to wear.

Due to the repeated high-frequency movement, friction and collision will inevitably occur between the wires and between the wires and the equipment, which will lead to problems such as wire wear and short circuit of the wire core over time.

The solution to the heating tube wire is easy to wear-use metal braided wire or metal corrugated tube to protect the wire. For heat wave heating tube products, the wire type, wire protection structure, and its length are all customized according to the customer's use.

The outlet wiring of the electric heating tube is easy to break

When the packaging machine is sealing, it can repeatedly open and close about 40-80 times per minute, and the fast type can reach more than 100 times per minute. During the opening and closing process, the heating tube reciprocates at a high frequency along with the sealed metal block. Since then, the wire of the heating tube performs a "single pendulum movement", so the outlet port of the heating tube is often easily damaged, the most common The damage method is disconnection.

The solution to the easy breakage of the outlet wiring-use an internal wiring type heating tube and use a wear-resistant wire. The internal wiring type heating tube has a detailed introduction on the official website of the heat wave, and no additional description is given here.

www.superbheater.com