Three common faults of the ironing machine

1. What should I do if the hot iron drips when using the hanging ironing machine?
If people start ironing clothes before their ironing machines reach the operating temperature, the ironing head will drip. When people use it, they should wait for the steam from the ironing machine to exhaust evenly before using it, so they don't have to worry about dripping water.
If people use a hanging ironing machine and the ironing head remains below 30 degrees for a long time, water will also drip. Therefore, people should pay attention to the angle of the ironing head when using it.
2. Why does the ironing machine automatically cut off power?
If people's ironing machine automatically cuts off power, first of all, they should check if they have forgotten to add water to the ironing machine, or if the water has been used up, and then check if the water inlet is blocked. Then find a solution based on the discovered problems. In addition, if the fuse of the ironing machine burns out due to excessive temperature, it will also automatically cut off the power. People only need to reconnect the fuse or replace it with a new one. If it is not caused by these two reasons, people must find professional maintenance personnel to come and repair.
3. What should I do if the preheating time of the ironing machine is too long?
The preheating time of the ironing machine is long, and people should check if there is too much water in the water tank. If so, it is recommended to unplug the power and then pour out the excess water in the water tank. If it's not a water quantity issue, it means there is buildup inside the ironing machine. In order to avoid scale, people often use hanging ironing machines to ensure that the scale is removed at least once a year or for 100 hours of use, otherwise the hanging ironing machine will be scrapped sooner or later.

The above content is organized by Superb heater Company, super heater. Mainly professional production: industrial heating elements, temperature measuring elements, production equipment, accessories, and raw materials such as tubular heaters, tubular heaters, belt heaters, ceramic heaters, silicone rubber heaters, thermocouples, etc.

Welcome global industry partners to discuss cooperation!