Tips for removing scale from single-head electric heating tubes

The main hazards of single-ended electric heating are:

1. The thermal efficiency is significantly reduced. The heating capacity of the single-ended electric heating tube is reduced due to the generation of a large amount of scale. The single-head tube does not need special fixed installation and can be directly placed in the heating channel for heating.

2. Scale is also prone to cause a heating tube leakage, bursting and other safety risks. Therefore, the scale attached to the electric heating tube must be paid enough attention by students. The function of the ptc electric heater is to heat the resistance after power is turned on and work through the blower.

3. Regarding the heating environment: the scale generated is easy to contaminate the heating liquid, breed a large number of bacteria, produce a large amount of scale precipitation, and easily cause internal blockage of the heating container.

4. The performance is damage to the electric heating tube. Due to the encirclement of scale, the internal temperature coefficient is too high, and the scale corrodes the electric heating tube, resulting in a significant decrease in the service life of the single-ended electric heating tube.

In short, if the balance is not solved in time, it will become a big problem, directly leading to damage of the single-end electric heating tube or possible damage to the equipment when running in the equipment. The consequences are quite serious. Therefore, how to deal with the electric heating balance, there are the following tips:

1. Try to keep the temperature change of the heating environment not too large. Too large temperature difference can easily lead to the formation of scale. If the heating temperature requirement is not too high, such as daily water for people's daily use, the water temperature should be kept within 50 degrees, so it is difficult to produce scale.

2. Develop a good habit of use. When heating the liquid, do not let the heating area separate from the liquid to reduce the formation of scale; when the heating method is completed, do not rush to use it next time. The power should be turned off for a period of time without heating the liquid, and the surface of the heating tube should be dried for a long time to reduce the formation of scale.

3. Scale is easy to form in the heating environment. If scale is easy to scale, you can develop the habit of regular maintenance and clean the scale regularly according to actual use. When manual cleaning is not possible, magnesium rods can be added to the container to reduce scale accumulation. Large diameter high quality quartz heating tubes can also be used for heating. On the one hand, scaling is not easy to form on the surface. On the other hand, the continuously generated infrared rays play a role in softening the water.