Typical application scenarios of air electric heaters

Typical application scenarios of air electric heaters

During operation, the low-temperature fluid medium of the air heater enters its input port through a pipeline under pressure, and follows a specific heat exchange channel inside the electric heating container. The path is designed using the fluid thermodynamics principle of the air electric heater, taking away the high-temperature thermal energy generated by the electric heating element in the air electric heater. This causes the temperature of the heated medium in the air electric heater to rise, and the outlet of the electric heater obtains the high-temperature medium required by the process. The internal control system of the electric heater automatically adjusts the output power of the electric heater based on the temperature sensor signal at the output port, so that the medium temperature at the output port of the air electric heater is uniform; When the heating element of the air electric heater overheats, the independent overheat protection device of the heating element immediately cuts off the heating power supply to prevent the heating material in the air electric heater from overheating and causing coking, deterioration, and carbonization. In severe cases, it can cause the heating element in the air electric heater to burn out, effectively extending the service life of the electric heater.

Air electric heater is also an internationally popular high-quality and long-life electric heating equipment. Air electric heaters are used for heating, insulation, and heating flowing liquid and gaseous media. When the heating medium in the air electric heater passes through the heating chamber of the electric heater under pressure, the huge heat generated by the electric heating element in the air electric heater during operation is uniformly carried away using the principle of fluid thermodynamics, so that the temperature of the heated medium in the air electric heater meets the user's process requirements.

In terms of its application scope, the typical application scenarios of electric heaters are:

1. The chemical industry involves heating up chemical materials, drying some powders under certain pressure, chemical processes, and jet drying.

2. Heating of hydrocarbons, including petroleum crude oil, heavy oil, fuel oil, thermal oil, lubricating oil, paraffin, etc.

3. Process water, superheated steam, molten salt, nitrogen (air) gas, water gas, and other fluids that require heating.

4. Due to its advanced explosion-proof structure, the equipment can be widely used in chemical, military, petroleum, and natural gas industries

Www.superbheater.com