Use of electric heating tube for mold temperature machine:

Use of electric heating tube for mold temperature machine:

 

1. The quality of the stainless steel mold is a factor of mechanical and electric heating tube quality, and the quality of the material is very important.

2. Reasonable selection of the raw materials of the mold temperature electromechanical heating tube is a prerequisite for ensuring the quality of the mold heating tube.

3. The principle of pipe selection: temperature resistance and corrosion resistance.

4. Resistance wire selection: Cr20Ni80.

5. Selection of magnesium oxide powder: industrial grade magnesium oxide powder.

6. Sealing material selection: silicone oil +704 sealant.

What is the electric heating tube for mold temperature machine

 

Mold temperature controller, also known as mold temperature controller, is used to heat or cool the mold and maintain its working temperature to ensure the quality of injection molded parts and optimize the processing time and stability. The temperature of the water temperature controller and the oil temperature controller. In the injection molding industry, the temperature of the mold has a decisive effect on the quality and time of injection molding. The temperature of the mold temperature machine is heated by the electric heating tube.

The mold temperature electromechanical heating tube structure is welded to the hexagonal nut single or multiple U-shaped heating tube, and the installation length of the heating tube bundle heating flange electric heating tube is limited. The terminal standard glass fiber reinforced plastic shell is equipped with a metal explosion-proof shell in some flammable and explosive situations. The product is strictly managed, precision processing technology, pipes and fasteners are treated with argon arc welding, and never leak.

Requirements for electric heating tubes for mold temperature machines:

 

1. The choice of materials, the heating medium is not corrosive, the scale is not serious, and what is the oil viscosity.

2. Pipe technology, no pressure in the container, with welded pipe or seamless pipe.

3. Installation, horizontal or vertical installation, need to reserve the cold side.

Parameters of electric heating tube for mold temperature machine:

 

1. Voltage: 12-660V.

2. Power: According to the heating medium and tube length design, the single injection power is 50W-20KW.

3. Pipe and thread materials: 10# iron, T4 copper, 1Cr18Ni9Ti stainless steel, titanium, etc.

4. Thread size: 6 points, 1 inch, 1.2 inches, 1.5 inches, 2 inches, etc.

5. Surface treatment: anti-scaling coating.

6. Specifications: U-shaped, W-shaped, special-shaped, finned heat pipe, explosion-proof electric heating pipe.

www.superbheater.com